Grooved Winch Drum Material: Carbon Steel, Alloy Steel, Stainless Steel, Aluminum, High-Strength Steel, Etc
Material Standards: GB, AISI, ASME, ASTM, JIS, DIN, ...
Ambient Temperature: -40 ° C To +45 ° C
Stroage Ambient Temperature: -40 ° C To +50 ° C
Groove Type of Drum: Spiral Grooves or Lebus Grooves
The Rotation Direction of The Drum: Lefthand or Righthand
Processing method: Machine Work
Wire Rope Diameter: 3 MM~100 MM
Processing Equipment: CNC machining center
Groove Drum Composition: Drum core, Flanges, Shaft, Etc
Processing: Rope drums with grooves cut directly into them.Winch drum with flange, the LBS groove is cut directly into the body of the
drum, according to customers’ requirements, the flanges are either welded or screw-bolted. groove geometry is determined by rope
construction, diameter and length, and by application. the drum has the required mounting dimensions for the actual operating conditions.
The Advantages of Nylon
1. High mechanical strength, good toughness, high tensile and compressive strength. Its specific tensile strength is higher than that of metal, and its compressive strength is similar to that of metal, but its rigidity is not as good as that of metal.
2. Outstanding fatigue resistance, parts after repeated bending can still maintain the original mechanical strength.
3. High softening point, heat resistance (such as nylon 46, high crystalline nylon thermal deformation temperature is high, can be used for a long time in 150 degrees. PA66 after glass fiber reinforced, its thermal deformation temperature of 250 degrees or above).
4. Smooth surface, small friction coefficient, wear-resistant.
5. Corrosion resistance, very alkali and most salt liquid, but also resistant to weak acid, oil, gasoline, aromatic compounds and general solvents, aromatic compounds are inert, but not resistant to strong acid and oxidizer. It can resist the erosion of gasoline, oil, fat, alcohol, alkali and has good anti-aging ability. Can be used as lubricating oil, fuel and other packaging materials.
